Creates a hard slick low-friction surface. VC Performance Epoxy is a two-part Fluoro micro-additive bearing epoxy that has a hard, slick finish ideal for use on the underwater surfaces of high performance powerboats and racing sailboats. Fluoro micro-additive adds lubricity and eases wet sanding and burnishing. The hard, stain-resistant finish is also ideal for rack-stored and trailered boats or boats that are kept in the water not requiring antifouling protection. VC Performance Epoxy has no antifouling or foul-release properties. Not for sale in California and in States where prohibited by law. Key FeaturesFluoro microadditive adds lubricity and eases wet sanding and burnishingStain-resistant finish is ideal for rack-stored and trailered boatsHard, smooth finishSpecifications Type: Two-part white epoxyepoxy with Fluoro micro-additive Recommended Usage: Dry-stored or trailerable boats; gel coat, epoxy, or metal hulls; racing boats Additives: Fluoro micro-additive Number of Coats Recommended: Three/four, as needed Coverage: 50sq.ft./qt.; 200sq.ft./gal. Drying Time: To touch: 2 to 3 hrs.; overcoating: window of between 4-6 and 24 hrs.; to launch: 3 to 7 days Thinner: Interlux 2316N, Model 198598; Interlux 2333N, Model 198606More informationFor detailed application instructions see the Interlux VC Performance epoxy Data Sheet.NOTE: Manufacturer data sheets are subject to revision. Linked data sheets are believed to be accurate at thetime of publication.